Chevy Remote Start Stopped Working – Why & How to Fix It

If you’re experiencing issues with your GM keyfob’s remote start button, you’re not alone. We’ve compiled a list of the top 10 reasons why your remote start system may not be functioning properly. Follow our guide to troubleshoot and resolve how to remote start Chevy Equinox. And stop in to Apple Chevrolet Tinley Park for more Chevy remote start assistance today! 

• Improper Starting Procedure

To initiate the remote start, press the lock button once, then hold the remote start button (usually shaped like an arrow) for at least 2 seconds or until the turn signal lamps flash. Make sure to continue holding the button until the vehicle starts.

• Vehicle Not in Park

For safety reasons, the remote start system will only work if your car is in the ‘Park’ position. Disengage and re-engage the ‘P’ gear before attempting the starting procedure again.

• Too Many Remote Start Attempts

If you have recently used the remote starter twice in quick succession, it may not work. Insert the key into the ignition, turn it ‘on’ and ‘off,’ and then exit the vehicle with the fob. Retry step #1 to start the vehicle remotely.

• Coolant and Oil Pressure

Check your engine’s coolant and oil levels. If the coolant temperature is too low or the oil pressure is insufficient, the remote start function will be disabled. Allow the car to cool down for 5-10 minutes, top up the fluid levels, and then retry the starting procedure.

• Unlatched Hood

An unlatched or open hood will prevent the remote start procedure from working. Firmly open and close the hood before attempting to start the vehicle remotely.

• Hazard Warning Lights

As a safety measure, the remote start system is disabled when the hazard lights are activated. If it’s safe to do so, turn off your hazard lights and retry step #1.

• The Key is in the Car

Ensure that the key fob is not left inside the vehicle. The remote start function will not work if the fob is present in the car. Remove it from the vehicle and retry step #1.

• Check Engine Light

If the ‘Check Engine Light’ or Malfunction Indicator Lamp (MIL) is illuminated, the remote start system will not function. Don’t panic, as one common reason for the MIL to light up is a loose gas cap. Reseal the cap, restart the car, and retry step #1.

• Dead Keyfob Battery

If none of the previous solutions have resolved the Chevy Malibu remote start issue, try replacing the battery in the keyfob. The keyfob typically uses a CR2032 lithium cell watch-type battery, which can be easily swapped following the diagram provided.

• Check the Manual

If all else fails, consult your vehicle’s manual for guidance. There may be additional features or specific instructions for the Chevy Equinox remote start function that could be affecting its operation. Take a moment to review the ‘Remote Start Procedure’ section in the manual.

Visit Apple Chevrolet!

Looking for Chevy dealers near me? At Apple Chevy Orland Park, you can find new and used Chevys for sale like Chevy Blazers for sale Tinley Park, IL, as well as receive excellent service for all of your automotive needs. While we are located in the beautiful suburb of Tinley Park, we serve residents throughout Cook County and the surrounding collar counties. We are the best choice when looking for a Chevrolet dealership in Tinley Park, IL and are proud to call those residents our customers. Visit our service department for help with Chevy remote start not working today!